- Other Plastic Products[10]
- Waterproof Membrane[10]
- Other Rubber Products[10]
- Seals[9]
- Other Auto Parts[4]
- Other Waterproofing Materials[10]
- Rubber Belts[7]
- Roofing Felts[2]
- Other Lab Supplies[2]
- Formwork[3]
- Steel Wire Mesh[3]
- Metal Building Materials[9]
- Adhesives & Sealants[10]
- Plastic Tubes[3]
- Bolts[3]
- Concrete Batching Plant[2]
- Other Construction Material Making Machinery[2]
- Plastic Product Making Machinery[7]
- Plastic Extruders[5]
- Plastic Sheets[7]
- Other Fireproofing Materials[2]
- Other Heat Insulation Materials[1]
- Sandwich Panels[2]
- Contact Person : Mr. Hu Victor
- Company Name : Shangan (Beijing) Science And Technology Develop Co., Ltd.
- Tel : 86-010-80251823
- Fax : 86-010-80251809
- Address : Beijing,Beijing,Yufa industrial zone Daxing district
- Country/Region : China
- Zip : 102600
Polysulfide sealants
Polysulfide sealant manufacturers,we are a big factory in Beijing!
The sealant is double-components cream,component A is white polysulfide sealant, component B is black curing
agent, mix ratio 12:1 to 10:1. The polysulfide sealant used for waterproof joint sealing or caulking in
subway,tunnel,driveway,highway,bridge, natatorium, cistern, hydro powerstation, sewage treatment, water supply
and drainage system.
The sealant is a netural substance, main characters:
1.non-toxic,no pollution,2.anti-mildew, anticorrosion3.waterproof, good resistance to oil,acid,alkali4.Tack free time less 24 hours, waterproof test can be carried out at 7 days, maxium adhesion will get in 28
days.
Instructions:
1.Clean working surface, make it dry, no dirt no oil.2.Mix component A and B by ratio 12:1 to 10:1(in lower temperature use more component B, high temperature use
less component B), fully mix two components until mixer’s color looks pure, well-distributed.3.Inject the mixer into joint by sealant gun, use trowel make surface plain.4.Use any waterproof cloth(fabric) keep the joint surface from rain or water in 24 hours.
Performance index:
Serial No. | Test item | Standard requirement |
1 | Surface drying time h | ≤24 |
2 | Liquidity(sag, N type)mm | ≤3 |
3 | Elastic recovery rate% | ≥70 |
4 | Stretch for bonding | No damage |
5 | Stretch for bonding after soaking | No damage |
Polysulfide sealants
